Crosby® G209/S209T Screw Pin Bow Shackle
Detail
Crosby products meet or exceed all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, Crosby products meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26. Look for the Red Pin® . . . the mark of genuine Crosby quality.
Specification
Forged - Quenched and Tempered, with alloy pins
Hot Dip galvanised or Self Coloured
Fatigue rated
1, 1-1/2, 2, 3-1/4 and 4-3/4 ton WLL available in industry standard black
(For more complete specifications, see table below)
|
Nominal |
Working |
Stock No. |
Weight |
Dimensions (mm) |
Tolerance |
||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
G-209 |
S-209T |
A |
B |
C |
D |
E |
F |
G |
H |
L |
M |
P |
C |
A |
|||
|
3⁄16 |
1⁄3 |
S1018357 |
- |
0.03 |
9.65 |
6.35 |
22.4 |
4.85 |
15.2 |
14.2 |
24.9 |
37.3 |
4.06 |
28.4 |
4.85 |
1.50 |
1.50 |
|
1⁄4 |
1⁄2 |
S1018375 |
- |
0.05 |
11.9 |
7.85 |
28.7 |
6.35 |
19.8 |
15.5 |
32.5 |
46.7 |
4.85 |
35.1 |
6.35 |
1.50 |
1.50 |
|
5⁄16 |
3⁄4 |
S1018393 |
- |
0.09 |
13.5 |
9.65 |
31.0 |
7.85 |
21.3 |
19.1 |
37.3 |
53.0 |
5.60 |
42.2 |
7.85 |
3.30 |
1.50 |
|
3⁄8 |
1 |
S1018419 |
S1018706 |
0.14 |
16.8 |
11.2 |
36.6 |
9.65 |
26.2 |
23.1 |
45.2 |
63.0 |
6.35 |
51.5 |
9.65 |
3.30 |
1.50 |
|
7⁄16 |
1-1⁄2 |
S1018437 |
S1018724 |
0.17 |
19.1 |
12.7 |
42.9 |
11.2 |
29.5 |
26.9 |
51.5 |
74.0 |
7.85 |
60.5 |
11.2 |
3.30 |
1.50 |
|
1⁄2 |
2 |
S1018455 |
S1018742 |
0.33 |
20.6 |
16.0 |
47.8 |
12.7 |
33.3 |
30.2 |
58.5 |
83.5 |
9.65 |
68.5 |
12.7 |
3.30 |
1.50 |
|
5⁄8 |
3-1⁄4 |
S1018473 |
S1018760 |
0.62 |
26.9 |
19.1 |
60.5 |
16.0 |
42.9 |
38.1 |
74.5 |
106 |
11.2 |
85.0 |
17.5 |
6.35 |
1.50 |
|
3⁄4 |
4-3⁄4 |
S1018491 |
S1018778 |
1.07 |
31.8 |
22.4 |
71.5 |
19.1 |
51.0 |
46.0 |
89.0 |
126 |
12.7 |
101 |
20.6 |
6.35 |
1.50 |
|
7⁄8 |
6-1⁄2 |
S1018516 |
- |
1.64 |
36.6 |
25.4 |
84.0 |
22.4 |
58.0 |
53.0 |
102 |
148 |
12.7 |
114 |
24.6 |
6.35 |
1.50 |
|
1 |
8-1⁄2 |
S1018534 |
- |
2.28 |
42.9 |
28.7 |
95.5 |
25.4 |
68.5 |
60.5 |
119 |
167 |
14.2 |
129 |
26.9 |
6.35 |
1.50 |
* Maximum Proof Load is 2.0 times the Working Load Limit. Minimum Ultimate Strength is 6 times the Working Load Limit.
Certification
Federal Specification: RRC-271D Type IVA, Grade A, Class 2
Sizes 1/2 ton to 8-1/2 ton meet the requirements of EN 13889:2003+A1:2008. (Forged steel shackles for general lifting purposes - Dee shackles and bow shackles - Grade 6 - Safety)
inspection / Testing
With over 40 years experience in maintaining it’s own rental fleet , Rigging Services offers the same regime of inspection and testing in compliance with the LOLER regulations to it’s clients. Rigging Services engineers are all LEEA qualified as testers , inspectors and verifiers on lifting & rigging equipment. Using its own bespoke software & hand held devices Rigging Services offers a real-time internet based reporting portal of onsite inspections and testing. Use our guest user name and password to log into our unique Onsite Online service and see what we mean. This cost effective , paperless solution allows legal compliance and peace of mind.
