Established 1997

  • Petzl PRO TRAXION Progress Capture Pulley

Petzl PRO TRAXION Progress Capture Pulley

The Petzl PRO TRAXION progress capture pulley is designed to allow rope installation while the pulley is connected to the anchor. With its large diameter sheave and high efficiency sealed ball bearings, it is particularly appropriate for hauling heavy loads. The side plate locks when loaded and prevents opening of the pulley during use. The auxiliary attachment point can be used for locking the pulley and creating different types of hauling systems. The PRO TRAXION also features a toothed cam with a self-cleaning slot designed to optimise performance under any conditions. May be used as simple pulley by locking the cam in the raised position. Individually tested and guaranteed for three years against any defects in materials or manufacture.
 

Rope compatibility: 8 to 13mm in diameter
Efficiency: 95 %
Maximum working load: 2 x 2.5 kN = 5 kN
Maximum working load as a rope clamp: 2.5 kN
Breaking strength as a rope clamp: 4 kN
Breaking strength as a pulley: 11 kN x 2 = 22 kN
Sheave type: sealed ball bearings
Sheave diameter: 38 mm
Weight: 265 g
​Material(s): aluminium, stainless steel, nylon
For more PRO TRAXION technical content, please visit Petzl's technical page.

The Petzl PRO TRAXION is certified by the following competent authorities:

EU Regulation 2016/425 on personal protective equipment with applicable standard:
  • EN 567:2013 (Mountaineering equipment - Rope clamps - Safety requirements and test methods).
The International Climbing and Mountaineering Federation UIAA 126:2013 with the exception of § 2.2.
Russian standard EAC TR CU 019/2011 (Safety of Personal Protective Equipment)
American standard on Fire Department Occupational Safety and Health Program NFPA 1983, T (Technical Use) (2017 ed.)

With over 40 years experience in maintaining it’s own rental fleet , Rigging Services offers the same regime of inspection and testing in compliance with the LOLER regulations to it’s clients. Rigging Services engineers are all LEEA qualified as testers , inspectors and verifiers on lifting & rigging equipment. Using its own bespoke software & hand held devices Rigging Services offers a real-time internet based reporting portal of onsite inspections and testing. Use our guest user name and password to log into our unique Onsite Online service and see what we mean. This cost effective , paperless solution allows legal compliance and peace of mind.

Onsite Online
View our training courses