Established 1997

  • Protective sheath protects the rope from abrasive contact and enhances rope glide.
  • Protective sheath can be removed for single mode use, to bring the user closer to the anchor.
  • Available also in black.
  • GRILLON lanyards are sold without connectors so that they can be combined with any connector, depending on a user's requirements.
  • Lanyard length is immediately identified by a colour coded label at the connector end.

Petzl GRILLON Adjustable Lanyard

Adjustable lanyard for work positioning

The Petzl GRILLON is a work positioning lanyard designed to complement a fall-arrest system. Available in seven different lengths (2, 3, 4, 5, 10, 15 and 20 m), it can be easily and precisely adjusted as necessary by operating the handle (which controls a pivoting cam). The GRILLON can be connected to the ventral attachment point of a harness (single mode) when the anchor is located above the user so that the load is evenly distributed between the belt and the leg loops. When a user's weight is supported by his/her feet (double mode), the GRILLON connects to the side attachment points of the harness ensuring better load distribution on the belt. Sewn terminations on both ends with plastic sheath keeps the connector in position and protects the rope from abrasion while a durable fabric sheath protects the rope from abrasive contact and enhances rope glide. This protection can be removed for single mode use, to bring the user closer to the anchor. The Petzl GRILLON is certified to North American, European and Russian standards. All Petzl products are guaranteed for three years against any defects in materials or manufacture.

Length: 2 m 3 m 4 m 5 m 10 m 15 m 20 m
Colour: white/yellow
or
black		 white/yellow
or
black		 white/yellow white/yellow white/yellow white/yellow white/yellow
Weight: 480 g 560 g 640 g 720 g 1,075 g 1,475 g 1,875 g
Materials: nylon, polyester, aluminium


For more GRILLON technical content, please visit Petzl's product technical page.

The Petzl GRILLON is certified by the following competent authorities:

UKCA: Satisfies the Essential Health & Safety Requirements of Regulation 2016/425 on Personal Protective Equipment as amended to apply in Great Britain, and is issued in compliance with the following designated standard: EN 358:2018; EN 795:2012 and EN 12841:2006.

CE: Meets European Regulation (EU) 2016/425 on personal protective equipment. EU Regulation 2016/425 on personal protective equipment with applicable standards: EN 358:2018; EN795:2012 Type B and Type C; EN12841: 2006 Type C.

EAC: Russian standard TP/TC 019/2011 (Safety of Personal Protective Equipment).

UL: American standard ANSI/ASSP Z359.3-19 Lanyard Class F (Requirements for Lanyards and Positioning Lanyards). Canadian standard CSA Z259.11-17 (Energy Absorbers and Lanyards).

With over 40 years experience in maintaining it’s own rental fleet , Rigging Services offers the same regime of inspection and testing in compliance with the LOLER regulations to it’s clients. Rigging Services engineers are all LEEA qualified as testers , inspectors and verifiers on lifting & rigging equipment. Using its own bespoke software & hand held devices Rigging Services offers a real-time internet based reporting portal of onsite inspections and testing. Use our guest user name and password to log into our unique Onsite Online service and see what we mean. This cost effective , paperless solution allows legal compliance and peace of mind.

Onsite Online

View our training courses