Petzl ABSORBICA-Y TIE-BACK Double Lanyard With Energy Absorber
Detail
The Petzl ABSORBICA-Y TIE-BACK is a double lanyard with integrated intermediate tie-back rings and compact energy absorber. It is designed for vertical progression on very large structures and when passing intermediate anchors. The TIE-BACK system allows the lanyard ends to be reconnected to fit around structures with a very large cross section. A durable fabric pouch which opens at each end, protects the energy absorber from abrasion or contaminants while allowing for regular inspection of the absorber. The energy absorber works with users who weigh between 50 and 130 kg by progressively tearing stitched webbing that reduces the impact of a fall. The arms are elasticized to avoid hindering progression. It is available with or without connectors and is certified to North American, European and Russian standards. All Petzl products are guaranteed for three years against any defects in materials or manufacture.
Specification
Connector: | None | MGO - Bm'D |
Length (without connectors): | 150 cm | 150 cm |
Length (with connectors): | (depends on connector attached) |
180 cm |
Weight: | 550 g | 2,030 g |
Material(s): | polyester, high-modulus polyethylene | polyester, high-modulus polyethylene
aluminium (connector)
|
For more technical ABSORBICA-Y TIE-BACK information, please visit Petzl's technical page.
Certification
The Petzl ABSORBICA-Y TIE-BACK is certified by the following competent authorities:
EU Regulation 2016/425 on personal protective equipment with applicable standards:- EN 355:2002 (Energy absorber)
- EN 362:2004 (MGO Connector, if equipped)
American standard ANSI Z359.13 12 feet energy absorber with ANSI Z359.12 certified MGO connector (if equipped).
Canadian standard CSA Z259.12-16 MGO connector only.
inspection / Testing
With over 40 years experience in maintaining it’s own rental fleet , Rigging Services offers the same regime of inspection and testing in compliance with the LOLER regulations to it’s clients. Rigging Services engineers are all LEEA qualified as testers , inspectors and verifiers on lifting & rigging equipment. Using its own bespoke software & hand held devices Rigging Services offers a real-time internet based reporting portal of onsite inspections and testing. Use our guest user name and password to log into our unique Onsite Online service and see what we mean. This cost effective , paperless solution allows legal compliance and peace of mind.