Petzl JANE-I Lanyard
Detail
The Petzl JANE-I is a non-adjustable dynamic rope lanyard that can be combined with an ABSORBICA energy absorber to make a single energy absorbing lanyard. The plastic sheath holds the carabiner in position and facilitates clipping while protecting the termination from abrasion. It can be used to set up a temporary anchor. Available in several lengths: 0.6, 1 and 1.5 metres. All Petzl products are guaranteed for three years against any defects in materials or manufacture.
Specification
| References | L050BA00 | L050BA01 | L050BA02 |
|---|---|---|---|
| Length | 60 cm | 100 cm | 150 cm |
| Weight | 100 g | 120 g | 145 g |
Certification
The Petzl JANE-I is certified by the following competent authorities:
EU Regulation 2016/425 on personal protective equipment with applicable standard:
- EN 354:2010 for personal fall protection of lanyards.
- EN 795:2012/B for personal fall protection equipment.Class B: anchor device with one or more stationary anchor points without the need for a structural anchor(s) or fixing element(s) to fix to the structure.
Russian standards of EAC TR CU 019/2011 (Safety of Personal Protective Equipment).
American standard ANSI Z359.3 Safety Requirements for Positioning and Travel Restraint Systems.
Canadian standard CSA Z259.11 Energy Absorbers and Lanyards.
inspection / Testing
With over 40 years experience in maintaining it’s own rental fleet , Rigging Services offers the same regime of inspection and testing in compliance with the LOLER regulations to it’s clients. Rigging Services engineers are all LEEA qualified as testers , inspectors and verifiers on lifting & rigging equipment. Using its own bespoke software & hand held devices Rigging Services offers a real-time internet based reporting portal of onsite inspections and testing. Use our guest user name and password to log into our unique Onsite Online service and see what we mean. This cost effective , paperless solution allows legal compliance and peace of mind.
