Petzl COEUR BOLT
Anchor
Detail
Petzl offers a range of anchors to best suit your needs according to conditions. The COEUR BOLT has a wide ergonomic hanger which allows for installation of up to two karabiners and is designed with rounded edges which in turn minimises wear on connectors. The hanger also utilises a textured back that prevents the hanger from rotating during installation or when it is heavily loaded laterally. The COEUR BOLT comes in boxes of 20 and is supplied with a hanger, a bolt and a nut with your choice of three variations in material types:
Petzl COEUR BOLT - Steel
- Economical choice for low-corrosion environments, i.e. climbing gyms (anchor class 3)
- Available in two bolt sizes (10 or 12 mm)
Petzl COEUR BOLT - Stainless Steel
- 316L stainless steel assembly that offers excellent resistance to corrosion in typical exterior environments where environmental factors are not aggressive enough to cause stress, corrosion or cracking (anchor class 2)
- Available in two bolt sizes (10 or 12 mm)
Petzl COEUR BOLT - High Corrosion Resistance (HCR)
- HCR 904 (High Corrosion Resistance) stainless steel assembly designed for corrosive environments (anchor class 1)
- Available in 12 mm only
Each Petzl COEUR BOLT is backed by Petzl's three year guarantee against any defects in materials or manufacture.
Specification
| SKUs: | P36BA 10 | P36BA 12 | P36BS 10 | P36BS 12 | P36BH 12 |
|---|---|---|---|---|---|
| Diameter: | 10 mm | 12 mm | 10 mm | 12 mm | 12 mm |
| Total bolt length: | 85 mm | 105 mm | 70 mm | 85 mm | 85 mm |
| Weight: | 110 g | 135 g | 110 g | 135 g | 145 g |
| Drilling diameter: | 10 mm | 12 mm | 10 mm | 12 mm | 12 mm |
| Shear strength in 50 MPa concrete: | 23 kN | 25 kN | 25 kN | 25 kN | 25 kN |
| Pull-out strength in concrete 50 MPa: | 15 kN | 18 kN | 15 kN | 18 kN | 18 kN |
| Material: | Steel | Steel | 316L stainless steel | 316L stainless steel | 904L HCR (High Corrosion Resistance) stainless steel |
Certification
CE: Conforms to the requirements of the European standard EN 959:2018
inspection / Testing
With over 40 years experience in maintaining it’s own rental fleet , Rigging Services offers the same regime of inspection and testing in compliance with the LOLER regulations to it’s clients. Rigging Services engineers are all LEEA qualified as testers , inspectors and verifiers on lifting & rigging equipment. Using its own bespoke software & hand held devices Rigging Services offers a real-time internet based reporting portal of onsite inspections and testing. Use our guest user name and password to log into our unique Onsite Online service and see what we mean. This cost effective , paperless solution allows legal compliance and peace of mind.
